2009
top
  • V. Ganvir, A. Lele, R. Thaokar, G. B P, Prediction of extrudate swell in polymer melt extrusion using an Arbitrary Lagrangian Eulerian (ALE) based finite element method, Journal of Non-Newtonial Fluid Mechanics, 156, 2009, pages 21-28.
pdf
  • S. Majumder, P. Natekar, V. Runkana, Virtual Indurator: A Tool for Simulation of Induration of Wet Iron Ore Pellets on a Moving Grate, Computers and Chemical Engineering , 33, 2009, pages 1141-1152.
pdf
  • R. Mehta, S. Sahay, Heat Transfer Mechanisms and Furnace Productivity During Coil Annealing: Aluminum vs. Steel, Journal of Materials Engineering and Performance, 18 (1), 2009.
pdf
  • K. Mitra, S. Majumder, V. Runkana, Multi-objective Pareto Optimization of an Industrial Straight Grate Iron Ore Induration Process Using Evolutionary Algorithms, Materials and Manufacturing Processes, 24, 2009, pages 331-342.
pdf
  • S. Pradhan, B. Nayak, S. Sahay, B. Mishra, Mechanical properties of graphite flakes and spherulites measured by nanoindentation , Carbon, 47, 2009, pages 2290-2292.
pdf
  • S. Raghavan, S. Sahay, Modeling the topological features during grain growth by cellular automaton, Computational Materials Science, 2009.
pdf
  • S. Sahay, G. Mohapatra, G. Totten, Overview of Pearlitic Rail Steel: Accelerated Cooling, Quenching, Microstructure, and Mechanical Properties, Journal of ASTM International, 6 (7), 2009.
pdf
2008
top
  • M. Andreij, G. B P, S. Goyal, P. Jan, M. Zbigniew, FEM Simulation of wire fracture phenomena during multi-pass drawing, Wire Journal International, 41, 2008, pages 93-99.
pdf
  • S. Majumdar, K. Kargupta, S. Ganguly, Mathematical Modeling for the Ionic Inclusion Process inside CP Based Thin-Films, Polymer Engineering & Science, 48 (11), 2008, pages 2229-2237.
pdf
  • S. Manigandan, S. Majumdar, S. Ganguly, K. Kargupta, Formation of Nano-rod and Nano-particles of Polyaniline Using LB Technique, Materials Letters, 62, 2008, pages 2758-2761.
pdf
  • R. Mehta, S. Sahay, A. Datta, A. Chodha, Neural Network Models for Industrial Batch Annealing Operation, Materials and Manufacturing Processes, 23, 2008, pages 204-209.
pdf
  • G. Mohapatra, S. Sahay, A probabilistic approach to analyze austenite to ferrite transformation in Fe-Ni system, Defect and Diffusion Forum, 279, 2008, pages 71-77.
pdf
  • R. Pardeshi, V. Voller, A. Singh, P. Dutta, An explicit–implicit time stepping scheme for solidification models, International Journal of Heat and Mass Transfer, 51, 2008, pages 3399–3409.
pdf
  • R. Pardeshi, A. Singh, P. Dutta, Modelling of solidification process in Rotary Electromagnetic Stirrer, Numerical Heat Transfer, Part A, 54, 2008.
pdf
  • B. Rai, P. , Design of highly selective industrial performance chemicals: A molecular modeling approach, Molecular Simulations, 34 (10), 2008, pages 1209-1214.
pdf
  • S. Sahay, Starch-Based Quenchants as an Eco-Friendly Alternative to Quenching Oil, Journal of ASTM International, 5 (10), 2008.
pdf
  • M. Singh, K. P C, P. , Preparation of alinite based cement from incinerator ash, Waste Management, 28, 2008, pages 1310-1316.
pdf
  • M. Singh, K. P C, P. , Preparation of calcium sulphoaluminate cement using fertiliser plant wastes, Journal of Hazardous Materials, 2008, pages 106-113.
pdf
  • V. Sista, P. Nash, S. Sahay, ACCELERATED BAINITIC TRANSFORMATION DURING CYCLIC AUSTEMPERING, Heat Transfer Progress, 2008, pages 45-47.
pdf
  • S. Manigandan, A. Jain, S. Majumdar, S. Ganguly, K. Kargupta, Formation of Nano-rods and Nano-particles of Polyaniline Using Langmuir Blodgett Technique: Performance study for ammonia sensor, Sensors and Actuators B, 133 (1), 2008, pages 187-194.
2007
top
  • V. Ganvir, A. Lele, R. Thaokar, B. Gautham, Simulation of viscoelastic flows of polymer solutions in abrupt contractions using an arbitrary Lagrangian Eulerian (ALE) based finite element method, Journal of Non-Newtonial Fluid Mechanics, 143, 2007, pages 157-169.
pdf
  • A. Gupta, P. Banerjee, A. Mishra, P. Sathish, P. , Effect of alcohol and polyglycol ether frothers on foam stability, bubble size and coal flotation, International Journal of Mineral Processing, 82 (3), 2007, pages 126-137.
pdf
  • S. Raghavan, S. Sahay, Modeling the grain growth kinetics by cellular automaton, Materials Science and Engineering A, 2007, pages 203-209.
pdf
  • S. Raha, K. Khilar, P. Kapur, P. , Regularities in pressure filtration of fine and colloidal suspensions, International Journal of Mineral Processing, 84, 2007, pages 348-360.
pdf
  • S. Sahay, R. Mehta, K. Krishnan, Genetic-Algorithm-Based Optimization of an Industrial Age-Hardening Operation for Packed Bundles of Aluminum Rods, Materials and Manufacturing Processes, 22, 2007, pages 615-622.
pdf
  • S. Sahay, K. Krishnan, Model based optimisation of continuous annealing operation for bundle of packed rods, Ironmaking & Steelmaking, 34 (1), 2007, pages 89-94.
pdf
  • S. Sahay, P. Kapur, Model based scheduling of a continuous annealing furnace, Ironmaking & Steelmaking, 34 (3), 2007, pages 262-268.
pdf
  • S. Singh, B. Gautham, S. Goyal, A. Joshi, D. Gudadhe, Development of a virtual wiredrawing tool for process analysis and optimization, Wire Journal International, 2007, pages 72-78.
pdf
  • S. Singh, K. Krishnan, S. Sahay, Modeling non-isothermal austenite to ferrite transformation in low carbon steels, Materials Science and Engineering A, 2007, pages 310-315.
pdf
  • V. Sista, P. Nash, S. Sahay, Accelerated bainitic transformation during cyclic austempering, Journal of Materials Science, 42, 2007, pages 9112-9115.
pdf
2006
top
  • K. Krishnan, S. Sahay, S. Singh, D. Pal, Modeling the accelerated cyclic annealing kinetics, Journal of Applied Physics, 100, 2006.
pdf
  • K. Mitra, S. Majumdar, Selection of Catalyst for the Esterification Step of the PPT Polymerization Process, Macromolecular Theory and Simulations, 15, 2006, pages 497-506.
pdf
  • N. Nath, K. Mandal, A. Singh, B. Basu, C. Bhanu, S. Kumar, A. Ghosh, Ladle furnace on-line reckoner for prediction and control of steel temperature and composition, Ironmaking & Steelmaking, 33 (2), 2006, pages 140-150.
pdf
  • D. Pal, A. Datta, S. Sahay, An Efficient Model for Batch Annealing Using a Neural Network, Materials and Manufacturing Processes, 21, 2006, pages 556-561.
pdf
  • P. , PROCESSING OF ALUMINA-RICH INDIAN IRON ORE SLIMES, International Journal of Minerals, Metals and Materials Engineering, 59 (5), 2006, pages 551-568.
pdf
  • V. Runkana, P. Somasundaran, P. Kapur, A population balance model for flocculation of colloidal suspensions by polymer bridging, Chemical Engineering Science, 61, 2006, pages 182-191.
pdf
  • S. Sahay, K. Krishnan, M. Kulthe, A. Chodha, B. Bhattacharya, A. Das, In Pursuit of Cycle Time Reduction of a Highly Automated Industrial Batch Annealing Operation, Tata Search, 2006.
pdf
  • S. Sahay, K. Krishnan, M. Kulthe, A. Chodha, B. Bhattacharya, A. Das, Model based optimisation of highly automated industrial batch annealing operation, Ironmaking & Steelmaking, 33 (4), 2006, pages 306-314.
pdf
  • S. Sahay, RESEARCH LEADS TO HEAT TREATING INNOVATION AND IMPROVEMENTS, Heat Transfer Progress, 2006, pages 25-29.
pdf
  • A. Singh, B. Basu, A. Ghosh, Role of Appropriate Permeability Model on Numerical Prediction of Macrosegregation, METALLURGICAL AND MATERIALS TRANSACTIONS B, 37, 2006, pages 799-809.
pdf
2005
top
  • D. Fuerstenau, P. , Zeta potentials in the flotation of oxide and silicate minerals, Advances in Colloid and Interface Science, 2005.
pdf
  • B. Gautham, P. Kapur, Rheological model for short duration response of semi-solid metals, Materials Science and Engineering A, 393, 2005, pages 223-228.
pdf
  • S. Majumdar, K. Mitra, S. Raha, Optimized species growth in epoxy polymerization with real-coded NSGA-II, Polymer, 46, 2005, pages 11858-11869.
pdf
  • S. Raha, K. Khilar, P. , P. Kapur, Pareto Profile Benchmark for Kinetics of Filtration and Extent of Dewatering of Fine and Colloidal Suspensions, Industrial Engieering Chemistry Research, 44, 2005, pages 9364-9368.
pdf
  • S. Raha, K. Khilar, P. , P. Kapur, Rapid determination of compressive yield stress of dense suspensions by a mean-phi model of high pressure filtration, Powder Technology, 155, 2005, pages 42-51.
pdf
  • V. Runkana, P. Somasundaran, P. Kapur, Reaction-Limited Aggregation in Presence of Short-Range Structural Forces, AIChE Journal, 51 (4), 2005, pages 1233-1245.
pdf
  • S. Sahay, K. Krishnan, Analysis of the nonisothermal crystallization kinetics in three linear aromatic polyester systems, Thermochimica Acta, 430, 2005, pages 23-29.
pdf
2004
top
  • K. Chandran, K. Panda, S. Sahay, TiBw-Reinforced Ti Composites: Processing, Properties, Application Prospects, and Research Needs, Journal of the Minerals, Metals and Materials Society, 2004, pages 42-48.
pdf
  • S. Majumdar, K. Mitra, Modeling of a reaction network and its optimization by genetic algorithm, Chemical Engineering Journal, 100, 2004, pages 109-118.
pdf
  • K. Mitra, S. Majumdar, S. Raha, Multiobjective dynamic optimization of a semi-batch epoxy polymerization process, Computers and Chemical Engineering , 28, 2004, pages 2583-2594.
pdf
  • R. Pardeshi, S. Basak, A. Singh, B. Basu, V. Mahashabde, S. Roy, S. Kumar, Mathematical Modeling of the Tundish of a Single-Strand Slab Caster, ISIJ International, 44 (9), 2004, pages 1534-1540.
pdf
  • P. , P. Kapur, Manufacture of Eco-friendly and energy-efficient alinite cements from flyashes and other bulk wastes, Resources Processing, 51 (1), 2004.
pdf
  • P. , B. Rai, P. Sathish, S. Krisnhamurthy, Rational Design of Dispersants for Colloidal Processing of Barium Titanate Suspensions by Molecular Modeling, Ferroelectrics, 306, 2004, pages 195-208.
pdf
  • P. , B. Rai, P. Sathish, Rational Design of Dispersants by Molecular Modeling for Advanced Ceramics Processing Applications, Kona, 22, 2004.
pdf
  • S. Raha, S. Majumdar, K. Mitra, Effect of Caustic Addition in Epoxy Polymerization Process: A Single and Multi-Objective Evolutionary Approach, Macromolecular Theory and Simulations, 13, 2004, pages 152-161.
pdf
  • B. Rai, S. P, C. Malhotra, P. , K. Ayappa, Molecular Dynamic Simulations of Self-Assembled Alkylthiolate Monolayers on an Au(111) Surface, Langmuir, 18, 2004, pages 3138-3144.
pdf
  • V. Runkana, P. Somasundaran, P. Kapur, Mathematical modeling of polymer-induced flocculation by charge neutralization, Journal of Colloid and Interface Science, 270, 2004, pages 347-358.
pdf
  • S. Sahay, An integrated batch annealing furnace simulator, Journal De Phisique IV, 120, 2004, pages 809-817.
pdf
  • S. Sahay, K. Mitra, COST MODEL BASED OPTIMISATION OF CARBURISING OPERATION, Surface Engineering, 20 (5), 2004, pages 379-384.
pdf
  • S. Sahay, A. Kumar, A. Chatterjee, Development of integrated model for batch annealing of cold rolled steels, Ironmaking & Steelmaking, 31 (2), 2004, pages 144-152.
pdf
  • S. Sahay, K. Krishnan, Modeling the isochronal crystallization kinetics, Physica B, 2004, pages 310-316.
pdf
  • S. Sahay, Opportunities and challenges for process modelling in surface and heat treatment operations, Surface Engineering, 20 (6), 2004, pages 401-403.
pdf
2003
top
  • B. Gautham, S. Goyal, A. Gandhe, Boundary controlled automatic remeshing for 2D simulation of metal forming, Journal of Materials Processing Technology, 134, 2003, pages 108-114.
pdf
  • P. Kapur, V. Runkana, Balling and granulation kinetics revisited, International Journal of Mineral Processing, 72, 2003, pages 417-427.
pdf
  • P. , B. Rai, Molecular modeling and rational design of flotation reagents, International Journal of Mineral Processing, 72, 2003, pages 95-110.
pdf
  • S. Sahay, C. Malhotra, A. Kolkhede, Accelerated grain growth behavior during cyclic annealing, Acta Materialia, 51, 2003, pages 339-346.
pdf
  • S. Sahay, K. Joshi, Heating Rate Effects During Non-Isothermal Annealing of AlK Steel, Journal of Materials Engineering and Performance, 12 (2), 2003, pages 157-164.
pdf
  • S. Sahay, B. Kumar, S. Krishnan, Microstructure Evolution During Batch Annealing, Journal of Materials Engineering and Performance, 12 (6), 2003, pages 701-707.
pdf
  • P. Somasundaran, V. Runkana, Modeling flocculation of colloidal mineral suspensions using population balances, International Journal of Mineral Processing, 72, 2003, pages 33-55.
pdf
2002
top
  • P. Kapur, S. Laha, S. Usher, R. deKrester, P. Scales, Modeling of the Consolidation Stage in Pressure Filtration of Compressible Cakes, Journal of Colloid and Interface Science, 256, 2002, pages 216-222.
pdf
  • E. Mielczarski, J. Mielczarski, J. Cases, B. Rai, P. , Influence of solution conditions and mineral surface structure on the formation of oleate adsorption layers on fluorite, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 205, 2002, pages 73-84.
pdf
  • P. , B. Rai, Design of tailor-made surfactants for industrial applications using a molecular modelling approach, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 205, 2002, pages 139-148.
pdf
  • P. , B. Rai, T. Rao, S. Krisnhamurthy, R. Vetrivel, J. Mielczarski, J. Cases, Molecular Modeling of Interactions of Alkyl Hydroxamates with Calcium Minerals, Journal of Colloid and Interface Science, 256, 2002, pages 106-113.
pdf
  • P. , B. Rai, T. Rao, S. Krisnhamurthy, R. Vetrivel, J. Mielczarski, J. Cases, Molecular Modeling of Interactions of Diphosphonic Acid Based Surfactants with Calcium Minerals, Langmuir, 18, 2002, pages 932-940.
pdf
  • V. Runkana, P. Kapur, S. Gupta, Modelling of granulation by a two-stage auto-layering mechanism in continuous industrial drums, Chemical Engineering Science, 57, 2002, pages 1685-1693.
pdf
  • S. Sahay, A. Kumar, APPLICATIONS OF INTEGRATED BATCH ANNEALING FURNACE SIMULATOR, Materials and Manufacturing Processes, 17 (4), 2002, pages 439-453.
pdf
2001
top
  • K. Das, P. Somasundaran, Ultra-low dosage flocculation of alumina using polyacrylic acid, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 182, 2001, pages 25-33.
pdf
  • S. Sahay, A. Kumar, S. Singh, A. Bhagat, M. Sharma, Development of an Integrated Batch Annealing Simulator for the CRM Complex, Tata Search, 2001, pages 64-71.
pdf
  • S. Sahay, G. Murty, UNCERTAINTY IN SEPARATING THE STRAIN CONTRIBUTIONS OF SLIDING AND DIFFUSION IN DIFFUSIONAL CREEP, Scripta Materialia, 44, 2001, pages 841-845.
pdf
  • A. Singh, R. Pardeshi, B. Basu, Modelling of convection during solidification of metal and alloys, Sadhana, 26 (1), 2001, pages 139-162.
pdf
  • S. Sivakumar, M. Subbanna, S. Sahay, V. Ramakrishnan, P. Kapur, P. , S. Malghan, Population balance model for solid state sintering II. Grain growth, Ceramics International, 27, 2001, pages 63-71.
pdf
2000
top
  • A. Singh, B. Basu, On Convection in Mushy Phase and Its Effect on Macrosegregation, METALLURGICAL AND MATERIALS TRANSACTIONS A, 31, 2000, pages 1687-1692.
pdf
1999
top
  • P. Kapur, T. Meloy, Industrial modeling of spirals for optimal configuration and design: spiral geometry, fluid flow and forces on particles, Powder Technology, 102, 1999, pages 244-252.
pdf
  • P. Kapur, Some applications of the AMPC model of the shear yield stress of particulate fluids, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 146, 1999, pages 25-32.
pdf
  • V. Runkana, S. Gupta, P. Kapur, A combined model for granule size distribution and cold bed permeability in the wet stage of iron ore sintering process, International Journal of Mineral Processing, 57, 1999, pages 43-58.
pdf
1998
top
  • V. Runkana, S. Gupta, P. Kapur, N. Ramachandran, Mathematical Modelling and Simulation of the Iron Ore Sintering Process, Tata Search, 1998, pages 50-55.
pdf
  • S. Sahay, S. Guruswamy, Epitaxial growth of PbTe film on Si substrate, Journal of Materials Science Letters, 17, 1998, pages 1145-1147.
pdf
1997
top
  • K. Das, P. , K. Natarajan, The Effect of Constituent Metal Ions on the Electrokinetics of Chalcopyrite, Journal of Colloid and Interface Science, 196, 1997.
pdf
  • V. Runkana, S. Gupta, P. Kapur, N. Ramachandran, Modeling of iron ore sinter feed granulation, Tata Search, 1997, pages 91-97.
pdf
  • A. Singh, D. Mazumdar, Mass Transfer between Solid and Liquid in a Gas-Stirred Vessel, METALLURGICAL AND MATERIALS TRANSACTIONS B, 28, 1997, pages 95-102.
pdf
1996
top
  • S. Sahay, K. S Ravichandran, Assessment of Residual Stresses in a Functionally Graded Material System, Advanced Composite Newsletter, 5 (4), 1996.
pdf